Experimental Physics and
Industrial Control System

hi:

I have an application where I was thinking of using one of the 4 comm ports on 
the MV167-172 series.

We are using MPF for serial communication.  Has anyone tried using these comm 
ports other than the console for using with external devices?  I would be 
inteseted in any support for these ports.  We would be needing a  generic 
support for these ports under MPF similar to some of the IP modules like 
octaluarts etc...


Any help would be appriciated.

thanks
mohan
-----------------------------------------------------------------
Mohan Ramanathan                      Beamline Operations  
[email protected]                     Advanced Photon Source
(630)-252-3773                        Argonne National Laboratory
(630)-252-9350 (FAX)                  Argonne, IL 60439
-----------------------------------------------------------------

Navigate by Date:

Prev: Re: Capfast Rules in 3.13.4 RULES.Host Ralph Lange

Next: Re: Capfast Rules in 3.13.4 RULES.Host Brian Bevins

Index: 1994  1995  1996  1997  1998  1999  2000  <2001>  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: CapFast Rules in 3.13.4 RULES.Host Dr. Chong Lee

Next: Sequencer 2.0.0 Mythili Srinivasan

Index: 1994  1995  1996  1997  1998  1999  2000  <2001>  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024