Experimental Physics and
Industrial Control System

Miroslaw Dach <[email protected]> · Fri, 24 Jul 1998 09:48:57 +0200 (MEST)

Dear EPICS tech-talk,

I wanted to install a driver drvXy566.o in a VME crate. As a processor
unit i am using Motorolla board MVME 147S-1.
The message that I got after the reboot of my crate is listed below:

############################################################################
###  @(#)EPICS IOC CORE
###  @(#)Version R3.13.0.beta.11 $$Date: 1997/07/14 14:04:12 $$
############################################################################
iocLogClient: unable to connect to 164.54.8.167 port 7004 because "errno =
0x33"
0x3b24cc (tShell): iocInit Failed to Initialize Ioc Log Client 
0x3b24cc (tShell): ../drvXy566.c: failed to map XY566 A24 base addr A24=0
0x3b24cc (tShell): ../drvXy566.c: failed to map XY566 A24 base addr
A24=40000
0x3b24cc (tShell): ../drvXy566.c: failed to map XY566 (latched) A24 base
addr A24=c0000
0x3b24cc (tShell): ../drvXy566.c: unable to map A24 XY566 base

Does anybody have any idea how to solve this problem

				Best Regards

				Mirek

=============================================================================
          Miroslaw Dach ([email protected]) - SLS/Controls Group 
                PSI - Paul Scherrer Institut CH-5232 Villigen
=============================================================================

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System