Experimental Physics and
Industrial Control System

Andy Foster <[email protected]> · Wed, 21 Jan 1998 13:15:51 +0000 (GMT)

Hi Ben,

My understanding of what happens when is contained in the following table:

On Wed, 21 Jan 1998, Benjamin Franksen wrote:

> So, if I have a non-CA OUT link with PP set, and a target field that is
> _not_ PP, the target record will still be processed? Or will it not be
> processed?
> 

Link From Source Record    PP of target field    LINK   RECORD PROCESSES
-----------------------    ------------------    ----   ----------------
NPP                        NO                    CA       NO
NPP                        YES                   CA       YES
NPP                        NO                    DB       NO
NPP                        YES                   DB       NO
PP                         NO                    CA       NO
PP                         YES                   CA       YES
PP                         NO                    DB       YES
PP                         YES                   DB       YES

... so the answer is the record will still be processed.

Cheers,

Andy

===================================================================================
Andy Foster
Royal Greenwich Observatory	Tel:       44 (0)1223 374899 (direct)
Madingley Road			Fax:       44 (0)1223 374700
Cambridge			E-mail:    [email protected]
CB3 0HA				Home Page: http://www.ast.cam.ac.uk/~ajf
UK

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System