EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: Port To PPC?
From: Noboru Yamamoto <[email protected]>
To: [email protected], [email protected]
Date: Thu, 16 Oct 1997 08:38:50 +0900
Russel M.Brill wrote:
 
>
>Is there a complete and reliable port of EPICS to the Power PC chip?
>
We have ported 3.12 to PPC board from Force. I cannot claim the port 
is complete. We only tested EPICS core and a couple of VME boards,
GP-IB borad from NI and Hytec CAMAC serial driver. 
So far, EPICS on this board is  working normally and shows 
10 times performance boosts over the CPU board based on MC68040.
We will report our experience in comming ICALEPCS97 conference in Chaina
next month.

Noboru Yamamoto
KEK, Accelerator Facility 

Navigate by Date:
Prev: RE: Port To PPC? Jeff Hill
Next: Re: VTR1012 Support Ralph Lange
Index: 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: Port To PPC? Jeff Hill
Next: edd/dm 2.2 Bill Brown
Index: 1994  1995  1996  <19971998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·