Experimental Physics and
Industrial Control System

> Follow-up question:
> The channel I'm most interested in is usually constant
> (i.e. unless something breaks). I tried triggering an alarm
> by setting the .HIGH value below the current value,
> expecting an alarm to show up, but it didn't.
> Is this expected bahavior?
> 
> Thanks again,
> 
> Maren

It should generate an alarm the next time the record is processed. How is it
processed ? Also, make sure .HSV is set to something other than NO_ALARM.


	Ned
	

Replies:

Re: Alarm handler question Maren Purves

Navigate by Date:

Prev: Re: Alarm handler question Maren Purves

Next: European Documentation Mirror Ralph Lange

Index: 1994  1995  1996  <1997>  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Alarm handler question Maren Purves

Next: Re: Alarm handler question Maren Purves

Index: 1994  1995  1996  <1997>  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024