GDD Reference Manual

gdd
gddAtomic
gddScalar
gddContainer
gddApplicationTypeTable

gddDestructor
gddBounds
gddBounds1D gddBounds2D gddBounds3D
gddCursor
gddSemaphore
gddIntLock

aitConvert
aitTimeStamp
aitString
aitTypes/aitEnums

new/delete Free List Management
Application Type Code Index Labels
gddStatus - Error Codes

DBR To ait Conversion Functions
gddMakeMapDBR
gddMapDbr
gddAitToDbr
gddDbrToAit

User's Guide


gdd

Main GDD library base class. A fundemental class for describing a scalar value, an array or an array of GDDs know as a container. See the User's Guide for a detailed explanation.

#include "gdd.h"

gdd(void)
gdd(gdd*)
Construct a new gdd that is empty or that is a copy of another gdd instance.

gdd(int ApplicationType);
gdd(int ApplicationType, aitEnum PrimitiveType);
gdd(int ApplicationType, aitEnum PrimitiveType, int Dimension);
gdd(int ApplicationType, aitEnum PrimitiveType, int Dimension, aitUint32* ElementCounts);
Construct a new gdd, describing various data properties. If Dimension is greater that zero, then ElementCounts is an array with Dimension number of elements in it. Each element of the array describes how many elements are in that dimension. The ElementCount information is used to initialize the bounds of a GDD.

unsigned applicationType(void) const;
aitEnum primitiveType(void) const;
unsigned dimension(void) const;
gddStatus changeType(int AppType, aitEnum PrimType) const;
Return the GDDs application type code. Return the type of data stored in the GDD. Remember that the application type code is arbitrarily set by the user and it imposes a user-level meaning to the data. The primitive type code is generally a compiler supported data type with a predetermined size, such as double, float, short, int, etc.. Return the dimension of the data in the GDD; zero indicates a scalar. ChangeType() allows for a GDD that is a scalar or a GDD with an undefined primitive type to be converted to a new primitive type and application type code. Changes in this case are safe.

changeType() return codes:
0 - Success
gddErrorTypeMismatch - GDD is not scalar or primitive type valid

gddDestructor* destructor(void) const;
gddStatus registerDestructor(gddDestructor*);
gddStatus replaceDestructor(gddDestructor*);
Methods for manipulating the user-defined GDD destructor. Destructor() just returns a reference to the GDDs destructor. RegisterDestructor() installs a destructor in the GDD if one is not already present. ReplaceDestructor() forces a GDDs destructor to be replaced.

registerDestructor() return codes:
0 - Success
gddErrorAlreadyDefined - gddDestructor already registered in GDD

const gddBounds* getBounds(void) const;
const gddBounds* getBounds(int dimension) const;
gddStatus getBound(unsigned dim_to_get, aitIndex& first, aitIndex& count);
gddStatus setBound(unsigned dim_to_set, aitIndex first, aitIndex count);
Retrieve the bounds array from the GDD or get a gddBounds for a particular dimension with the first two methods listed. Get and set information contained within the bounds structure of a GDD. Dimension bounds in the GDD library are always expressed as (first,count), see the User's guide for details.

getBound() and setBound return codes:
0 - Success
gddErrorOutOfBounds - requested dimension does not exist

void dump(void);
Print out all the information contained in the fields of a GDD in a useful,readable fashion. Good tool for learning about the information a GDD holds.

void setPrimType(aitEnum PrimitiveEnumType);
void setApplType(int ApplicationTypeCode);
Force the GDD to change the primitive type of the data it describes. Changing the primitive type code is generally an unnatural thing to do. Force a GDD to change the application type, which effectively changes the high-level meaning of the data held within the GDD.

void setDimension(int);
Describe the data a GDD hold in terms of a different dimension. This call does not alter the data, it does however deallocate bounds and reallocate them to match the new dimension. This call can really cause probably when dealing with packed or flattened GDDs. This operation is not advisable is simple applications, users are better off deleting the GDD and creating one that suites the data in mosts instances.

void* dataAddress(void) const;
void* dataPointer(void) const;
void* dataPointer(aitIndx element_offset) const;
All of these methods are designed to give the user general access to the data within a GDD. These calls are meant to be used internally and by specialized libraries. The last method listed will give the starting address of a portion of a simple single dimensional array given an element offset.

void destroyData(void);
If the GDD is describing an array and a destructor is present, then run the destructor. If the GDD is a container, then run the destructor giving the argument to the run() function the address of the container rather then the data that the GDD holds.

gddStatus reset(aitEnum primtype,int dimension, aitIndex* dim_counts);
gddStatus clear(void);
gddStatus clearData(void);
The clear() method completely clears out a GDD, this includes removing bounds information, running destructors, and resetting every field in a GDD to invalid. The clearData() method keeps the GDD information intact, but runs the data destructors and clears out the data field. Reset() first runs clear() on the GDD, and then resets the primitive type, dimension, and bounds information, the appliacation type code remains the same.

clear() return codes:
0 - Success
gddErrorNotAllowed - if GDD is flattened or managed
clearData() return codes:
0 - Success
gddErrorNotAllowed - if GDD is a container
reset() return codes:
0 - Success
gddErrorNotAllowed - if GDD is flattened, managed, or a container

void getTimeStamp(struct timespec* const ts) const;
void getTimeStamp(aitTimeStamp* const ts) const;
void setTimeStamp(const struct timespec* const ts);
void setTimeStamp(const aitTimeStamp* const ts);
Manipulate the time stamp field of the GDD using an aitTimeStamp structure or a standard struct timespec.

void setStatus(aitUint32);
void getStatus(aitUint32&);
Use the status field of the GDD is a general fashion. The status field is assigned a value arbitrarily by the user.

void setStat(aitUint16);
void setSevr(aitUint16);
aitUint16 getStat(void) const;
aitUint16 getSevr(void) const;
void setStatSevr(aitInt16 stat, aitInt16 sevr);
void getStatSevr(aitInt16& stat, aitInt16& sevr);
Manipulate the status field of a GDD as a combination 16-bit status and 16-bit severity field.

size_t getTotalSizeBytes(void) const;
Return the total size in bytes of the entire GDD including all the data it references and bounds array. This is the length of the GDD and all the items it references.

size_t getDataSizeBytes(void) const;
Return the total size in bytes of the data that the GDD contains or references.

aitUint32 getDataSizeElements(void) const;
Return the number of elements that the GDD describes.

gddStatus copyData(const gdd* dd);
Copy the data from gdd dd to this gdd. This function resets the bounds, the dimension, the primitive type and the application. In addition, it allocates a buffer large enough to hold all the data from dd and copies the data from dd to the new buffer and references it into this gdd. A new standard gddDestructor is allocated and registered into this GDD that will be used to delete the newly created data buffer.

return codes:
0 - Success
gddErrorNotAllowed - if this GDD is flattened, managed, or a container

gddStatus copyInfo(gdd* dd);
Copy the data description fields from dd to this gdd. The primitive type, application type, dimension, and bounds are copied. This gdd is cleared completely before the information from dd is copied. If dd is a container, then this gdd becomes a container which looks just like dd without any data.

return codes:
0 - Success
gddErrorNotAllowed - if this GDD is flattened or managed

gddStatus copy(gdd* dd);
gddStatus dup(gdd* dd);
Copy() does everything that copyInfo() does, but also copies the data just as copyData() would. Dup() does everything that copyInfo() does, but references the data that dd contains. If dd has a user registered destructor, the this gdd registers the same destructor instance and bumps up the destructor reference count.

return codes:
0 - Success
gddErrorNotAllowed - if this GDD is flattened or managed

size_t flattenWithAddress(void* buf, size_t buf_size, aitIndex* total_dds);
size_t flattenWithOffsets(void* buf, size_t buf_size, aitIndex* total_dds);
These functions pack this gdd instance into buffer buf. Both functions return the amount of space in bytes used by this gdd. The function will not go beyond buf_size. The parameter total_dds will be modified to reflect the total gdds packed into buf. Flattened GDDs can be directly indexed, the total_dds variable indicates the number of elements in the gdd array starting at buf. This function can pack scalar GDDs, atomic GDDs, or container GDDs recursively. The organization of the buffer is as follows: All GDDs are first, all bounds information follows, and array data for all the GDDs follow the bounds. The flattenWithAddress() method is the standard way to produce a useable, packed GDD. The method flattenWithOffsets() puts offsets in where address normally go in GDD fields. This function allows GDD to be transfered from one machine or address space to another when used in conjunction with convertOffsetsToAddress() and convertAddressToOffsets().

gddStatus convertAddressToOffsets(void);
gddStatus convertOffsetsToAddress(void);
These functions run through this gdd and convert all addressing information from offsets (from zero) to real addresses or real addresses to offsets. These function work recursively with container type GDDs. The function convertAddressToOffsets() can only work with a GDD that is flattened.

convertAddressToOffsets() return codes:
0 - Success
gddErrorNotAllowed - if this GDD is not flattened

int isScalar(void) const;
int isAtomic(void) const;
int isContainer(void) const;
Each return true to indicate the type of GDD that this is.

int isManaged(void) const;
void markManaged(void);
void markUnmanaged(void);
Manipulate the GDD managed state flag. A managed GDD is managed by a higher level facility such as the application type table. Managed GDDs have special properties, such as a destructor that knows how to place the GDD back on a free list buffer pool. All GDDs retrieved from the application type table that are associated with a prototype will be managed. Certain copy operations are not allows on managed GDDs. See the User's Guide for further details.

int isFlat(void) const;
Discover if this GDD has been flattened.

int isLocalDataFormat(void) const;
int isNetworkDataFormat(void) const;
void markLocalDataFormat(void);
Indicate that data stored in the GDD is in a local byte order or floating point format. Discover if data in the GDD is in local data format.

int isConstant(void) const;
void markConstant(void);
Control the constant state flag of this GDD. The data in a constant GDD cannot be changed.

int isNoRef(void) const;
gddStatus noReferencing(void);
gddStatus reference(void);
gddStatus unreference(void);
Control and manipulate the reference counts of a GDD. Reference() bumps up the GDD reference count. Unreference() decrements the reference count of this GDD, if the reference count drops to zero, then the GDD is deleted. NoReferencing() locks the GDD reference count and disallows further referencing of this GDD.

noReferencing() return codes:
0 - Success
gddErrorNotAllowed - if this GDD has reference count > 1 already
reference() return codes:
0 - Success
gddErrorNotAllowed - if referencing is not allowed on this GDD
unreference() return codes:
0 - Success
gddErrorUnderflow - if reference count is zero before decrement

gddStatus genCopy(aitEnum dtype, const void* buffer);
Generalized copy routine that takes data from buffer of type dtype and puts it into this gdd. If this gdd is a scalar, then one element from buffer is converted to the primitive type of the GDD and copied in. If this GDD is an array, then the number of elements copied is determined by the bounds information stored in this GDD. Is this GDD described an array, but has no data buffer associated with it, then a new buffer is allocated which is the size the bounds describes, and the data from parameter buffer is converted to the GDD primitive type and put into the newly created GDD buffer. Not a commonly used function.

return codes:
0 - Success
gddErrorTypeMismatch - If this GDD is a container

void adjust(gddDestructor* dest, void* dbuf, aitEnum dtype);
This function runs the destructor in this GDD if present, effectively destroying the data is this GDD. The parameter dest becomes the new destructor, dbuf becomes the GDD's referenced data buffer, and dtype becomes the new primitive type for this GDD. Not a commonly used function.

void set(aitEnum dtype, void* dbuf);
void get(aitEnum dtype, void* dbuf);
Generalized functions for copying the first element of this GDD into and out from dbuf. Set() takes one element pointed to by dbuf of type dtype and converts it to this GDD primitive type and copies it to this GDDs data field. Get() takes one element of this GDD's data field and convert it to dtype and copies it into dbuf. Not a commonly used function.

void getRef(ait_xxxxx*& dbuf);
Standard way to get access to the data buffer an array-type GDD references. There is one of these methods for each of the supported ait types. The dbuf parameter is modified to point to the GDD's data buffer. There is a danger here. Data pointers in a GDD are stored as void*. The primitive type indicates the true type of data. These methods can be used to cast the data pointer to any of the ait types, completely ingoring the primitive type code. The idea here is that the user will dicover the correct primitive type and call the correct method.

void putRef(ait_xxxxx* dbuf, gddDestructor dest=NULL);
void putRef(const ait_xxxxx* dbuf, gddDestructor dest=NULL);
void putRef(void* dbuf,aitEnum code,gddDestructor dest=NULL);
Standard way to reference data into a GDD and optionally supply a destructor. These methods are designed to work with array or atomic type GDDs. There is one of these methods for each of the support ait types. All these methods invoke adjust() to do the work with the correct aitEnum type code. See adjust() for further details. The second method listed marks the GDD state as constant.

void getConvert(ait_xxxxx& dbuf);
Standard way to retreive scalar data from this GDD. There is one of these methods for each of the ait types. The data in the GDD will be converted from it's primitive type to the ait_xxxxx data type and placed into dbuf. These methods invoke "void get(aitEnum dtype, void* dbuf)".

void putConvert(ait_xxxxx dbuf);
Standard way to place a scalar value into a GDD. There is one of these methods for each of the ait types. The data will be converted from ait_xxxxx to the GDD's primitive type and placed into the data field. These methods invoke set().

gddStatus put(const ait_xxxxx* const dbuf);
Standard way to copy data from dbuf of type ait_xxxxx into this GDD's buffer. There is one of these methods for each of the ait types. These methods invoke genCopy() with proper arguments, see genCopy() for further details. The return codes of these methods are the same as genCopy().

gddStatus put(ait_xxxxx dbuf);
Standard way to place a scalar value into this scalar GDD and reset the There is one of these methods for each of the ait types. primtive type to match ait_xxxxx. No conversions take place in these methods, they are meant to adjust the primitive type.

return codes:
0 - Success
gddErrorNotAllowed - If this GDD is not a scalar

gddStatus put(const gdd* dbuf);
Put the data from dbuf into this GDD. Resets all information in this GDD to match dbuf.

return codes:
0 - Success
gddErrorNotSupported - If this GDD or dbuf is a container. Also if dbuf has dimension greater than one.
gddErrorOutOfBounds - Attempting to copying more dbuf elements into this GDD then this GDD can hold.
gddErrorNotAllowed - If this GDD has no allocated data but has a destructor registered.

void get(ait_xxxxx* dbuf);
void get(void* dbuf, aitEnum dtype);
Standard way to retrieve array data from this GDD into dbuf with primitive type conversion. There is one of these methods for each of the ait types. The amount of data copied out of this GDD depends on the primitive type (for size of element information), and the dimension/bounds for the total element count. These methods will convert the data from the GDDs primitive type to the ait_xxxxx type as the copy is taking place. Depending on the conversion, the size required by dbuf may be more or less then the size of this GDD's data buffer.

void get(ait_xxxxx& dbuf);
Standard way to get scalar data out of this GDD and perform data conversions from this GDD primitive type to ait_xxxxx. There is one of these methods for each of the ait types. These methods simply invoke "void get(aitEnum dtype, void* dbuf)", see this method for further details.

gdd& operator=(ait_xxxxx* v);
Convenience methods so the equal operator can be used. Same as putRef(...) methods.

gdd& operator=(ait_xxxxx v);
Convenience methods so the equal operator can be used. Same as put(...) methods.

operator ait_xxxxx*(void) const;

operator ait_xxxxx(void) const;
Convenience methods so casting can be done from this GDD to any supported ait_xxxxx pointer variable. Same as getRef(...) and get(...) methods.


Argonne National Laboratory Copyright Information
Jim Kowalkowski (jbk@aps.anl.gov)
updated 4/12/95