EPICS Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?)

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?)
From:	"Shen, Guobao" <[email protected]>
To:	"Wang, Lin" <[email protected]>, Michael Davidsaver <[email protected]>
Cc:	EPICS Tech-Talk <[email protected]>
Date:	Mon, 16 Oct 2017 12:45:33 +0000

Hi Lin,
Michael might have the answers for all your questions.
It would be a valuable test if you can compile and run it in your environment since you are evaluating it for your next project.

Thanks,
Guobao

On 10/16/17, 5:46 AM, "[email protected] on behalf of Wang, Lin" <[email protected] on behalf of [email protected]> wrote:

    
    Hello Michael,
    
    I have two questions about this new release.
    
    1. Does it support (fully, partly or not) the MRF VME-EVM-300 and VME-EVR-300 (which are not in the supported hardware list yet)? If not, is there any fork of mrfioc2 that can support them?
    2. Is it already perfectly compatible with VxWorks (say VxWorks 6.8)? I remember it was not fully tested or guaranteed to work properly on VxWorks a couple of years ago.
    
    I ask because my colleagues planned to build a timing system prototype using the MRF VME-EVM-300 and VME-EVR-300 for our HEPS (High Energy Photon Source) project. We are now evaluating the operating system and the EPICS driver for it, and VxWorks is still our preference.
    
    Any suggestion is appreciated.
    
    
    Thanks,
    Lin
     
    
    
    > -----Original Messages-----
    > From: "Michael Davidsaver" <[email protected]>
    > Sent Time: 2017-10-09 18:22:54 (Monday)
    > To: "EPICS Tech-Talk" <[email protected]>
    > Cc: 
    > Subject: mrfioc2 release 2.2.0
    > 
    > Version 2.2.0 of the mrfioc2 driver for MRF timing cards is now available.
    > 
    > This release adds support for newer 300 series PCI devices.  Some
    > incompatible changes have been made since the previous 2.1.0 release.
    > The minimum required versions of Base and devlib2 have been updated.
    > See the supported hardware list and change log for details.
    > 
    > http://epics.sourceforge.net/mrfioc2/
    >

Replies:: Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Pietryla, Anthony F.

References:: mrfioc2 release 2.2.0 Michael Davidsaver; Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Wang, Lin

Navigate by Date:: Prev: Re: EPICS training information Jiro Fujita; Next: Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Pietryla, Anthony F.; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Wang, Lin; Next: Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Pietryla, Anthony F.; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024