Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?)
From: "Shen, Guobao" <gshen1@aps.anl.gov>
To: "Wang, Lin" <wanglin@ihep.ac.cn>, Michael Davidsaver <mdavidsaver@gmail.com>
Cc: EPICS Tech-Talk <tech-talk@aps.anl.gov>
Date: Mon, 16 Oct 2017 12:45:33 +0000
Hi Lin,
Michael might have the answers for all your questions.
It would be a valuable test if you can compile and run it in your environment since you are evaluating it for your next project.

Thanks,
Guobao

On 10/16/17, 5:46 AM, "tech-talk-bounces@aps.anl.gov on behalf of Wang, Lin" <tech-talk-bounces@aps.anl.gov on behalf of wanglin@ihep.ac.cn> wrote:

    
    Hello Michael,
    
    I have two questions about this new release.
    
    1. Does it support (fully, partly or not) the MRF VME-EVM-300 and VME-EVR-300 (which are not in the supported hardware list yet)? If not, is there any fork of mrfioc2 that can support them?
    2. Is it already perfectly compatible with VxWorks (say VxWorks 6.8)? I remember it was not fully tested or guaranteed to work properly on VxWorks a couple of years ago.
    
    I ask because my colleagues planned to build a timing system prototype using the MRF VME-EVM-300 and VME-EVR-300 for our HEPS (High Energy Photon Source) project. We are now evaluating the operating system and the EPICS driver for it, and VxWorks is still our preference.
    
    Any suggestion is appreciated.
    
    
    Thanks,
    Lin
     
    
    
    > -----Original Messages-----
    > From: "Michael Davidsaver" <mdavidsaver@gmail.com>
    > Sent Time: 2017-10-09 18:22:54 (Monday)
    > To: "EPICS Tech-Talk" <tech-talk@aps.anl.gov>
    > Cc: 
    > Subject: mrfioc2 release 2.2.0
    > 
    > Version 2.2.0 of the mrfioc2 driver for MRF timing cards is now available.
    > 
    > This release adds support for newer 300 series PCI devices.  Some
    > incompatible changes have been made since the previous 2.1.0 release.
    > The minimum required versions of Base and devlib2 have been updated.
    > See the supported hardware list and change log for details.
    > 
    > http://epics.sourceforge.net/mrfioc2/
    > 
    
    


Replies:
Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Pietryla, Anthony F.
References:
mrfioc2 release 2.2.0 Michael Davidsaver
Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Wang, Lin

Navigate by Date:
Prev: Re: EPICS training information Jiro Fujita
Next: Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Pietryla, Anthony F.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Wang, Lin
Next: Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Pietryla, Anthony F.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 16 Oct 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·