EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?)
From: "Wang, Lin" <[email protected]>
To: "Michael Davidsaver" <[email protected]>
Cc: EPICS Tech-Talk <[email protected]>
Date: Mon, 16 Oct 2017 18:45:58 +0800 (GMT+08:00) 
Hello Michael,

I have two questions about this new release.

1. Does it support (fully, partly or not) the MRF VME-EVM-300 and VME-EVR-300 (which are not in the supported hardware list yet)? If not, is there any fork of mrfioc2 that can support them?
2. Is it already perfectly compatible with VxWorks (say VxWorks 6.8)? I remember it was not fully tested or guaranteed to work properly on VxWorks a couple of years ago.

I ask because my colleagues planned to build a timing system prototype using the MRF VME-EVM-300 and VME-EVR-300 for our HEPS (High Energy Photon Source) project. We are now evaluating the operating system and the EPICS driver for it, and VxWorks is still our preference.

Any suggestion is appreciated.


Thanks,
Lin
 


> -----Original Messages-----
> From: "Michael Davidsaver" <[email protected]>
> Sent Time: 2017-10-09 18:22:54 (Monday)
> To: "EPICS Tech-Talk" <[email protected]>
> Cc: 
> Subject: mrfioc2 release 2.2.0
> 
> Version 2.2.0 of the mrfioc2 driver for MRF timing cards is now available.
> 
> This release adds support for newer 300 series PCI devices.  Some
> incompatible changes have been made since the previous 2.1.0 release.
> The minimum required versions of Base and devlib2 have been updated.
> See the supported hardware list and change log for details.
> 
> http://epics.sourceforge.net/mrfioc2/
>
Replies:
Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Shen, Guobao
Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Michael Davidsaver
References:
mrfioc2 release 2.2.0 Michael Davidsaver
Navigate by Date:
Prev: Re: Problem still exist - Question about the speed of synchronization of CaChannel (python file in the attachment) ? Wang Xiaoqiang (PSI)
Next: Re: EPICS training information Jiro Fujita
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: mrfioc2 release 2.2.0 Michael Davidsaver
Next: Re: mrfioc2 release 2.2.0 (Supports VME-EVM-300 & VME-EVR-300 or not?) Shen, Guobao
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024