Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: RE: PI E-873 motors
From: "Goetze, Kurt A." <goetze@aps.anl.gov>
To: Eric Norum <wenorum@lbl.gov>, EPICS mailing list <tech-talk@aps.anl.gov>
Date: Tue, 26 Sep 2017 15:27:49 +0000
Hi Eric,

According to PI, this controller uses the "PI General Command Set" (GCS).  So motorApp/PIGCS2Src should work.  PI wrote this driver, so they should be able to help you if you if this code needs to be updated.  They have been helpful in the past.  Our contact at PI is Steffen Rau.

Kurt

-----Original Message-----
From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of Eric Norum
Sent: Tuesday, September 26, 2017 10:13 AM
To: EPICS mailing list <tech-talk@aps.anl.gov>
Subject: PI E-873 motors

Which, if any, of the drivers in motorApp/PiSrc/ are appropriate for E-873 motors?

Thanks,
— 
Eric Norum
wenorum@lbl.gov


References:
PI E-873 motors Eric Norum

Navigate by Date:
Prev: Re: PI E-873 motors Roehrig, Christian
Next: Re: PI E-873 motors Eric Norum
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Re: PI E-873 motors Eric Norum
Next: issue with epics in python Cyrille Thomas
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 27 Sep 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·