EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: log client in base 3.15
From: <[email protected]>
To: <[email protected]>
Date: Mon, 18 Sep 2017 15:25:56 +0000
Hi,

I'd noticed some of our IOC log messages were appearing in our caPutLog log since we moved to base 3.15.5  Having looked at the code, it seems that in 3.15 logClientCreate() calls errlogAddListener() whereas in 3.14 this was not the case and errlogAddListener() was called from iocLogClientInit()   I moved the errlogAddListener() call back into iocLogClientInit() and that seemed to fix my immediate problem, but that may not be the best solution as I guess the change was made to make it clear/easier to add additional errlog clients?  

Regards,

Freddie


Replies:
Re: log client in base 3.15 Andrew Johnson

Navigate by Date:
Prev: Re: Action Button in Display Builder Kasemir, Kay
Next: Re: Action Button in Display Builder Maren Purves
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: Notification of Archiver Appliance interruptions will.rogers
Next: Re: log client in base 3.15 Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024