Hi,
I have a device, that sends to a dedicated IP address and port combination
(10.0.0.1:2036) a message at startup. It then expects a message back,
specifying the port number of the host to send further messages to.
The device is connected to a second ethernet interface of a computer that has
the 10.0.0.1 address assigned to it.
Can one use drvAsynIPServerPort for that? And if yes how do I connect a
callbackfuntion, that gets called if there is a connection from my device. I
need to reset the connection to the device in case of a reset/reboot of the
device.
To communicate with the device I want to use drvAsynIPPort Which I would open
in the callback function.
Regards
Jörn
- Replies:
- RE: Listen on UDP socket for device message Mark Rivers
- Navigate by Date:
- Prev:
Re: Why do I need to prevent looping when deploying CA gateway Andrew Johnson
- Next:
RE: Listen on UDP socket for device message Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Why do I need to prevent looping when deploying CA gateway Andrew Johnson
- Next:
RE: Listen on UDP socket for device message Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
|