Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: Re: Changing AI INP field
From: Ralph Lange <ralph.lange@gmx.de>
To: EPICS Tech Talk <tech-talk@aps.anl.gov>
Date: Wed, 19 Jul 2017 22:50:17 +0200
Summing up an off-list communication for the record:

The introduction of the "Extended Device Support" In 3.14.8 (released 2005) broke pre-3.14.8 device supports that were allowing on-line changes of hardware address links.
This new mechanism and the necessary changes are documented in the chapter "Extended Device Support" of the App Developers Guide.

Good luck!
~Ralph
[EPICS historian]



On Wed, Jul 19, 2017 at 8:39 PM, bob dalesio <bob.dalesio@gmail.com> wrote:
We used to be able to do this in 3.14. In 3.15.5, this is not working.
Did something change?
Thanks,
Bob


References:
Changing AI INP field bob dalesio

Navigate by Date:
Prev: Re: Time interval for Asyn auto reconnect Paduan Donadio, Marcio
Next: RE: questions about the X-123SDD mca driver for epics Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Changing AI INP field bob dalesio
Next: RE: questions about the X-123SDD mca driver for epics Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 19 Jul 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·