Experimental Physics and
Industrial Control System

I see the expected space with 3.15.3 and 3.16.1.

What do you see if you run the following?

> caget -F '|' V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I



On 07/14/2017 05:47 PM, Shen, Guobao wrote:
> Hi,
> Does any one notice the problem with CLI tool with caget?
> There is no space in the result between pv name and result.
> 
> For example:
> $ caget V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I
> V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I-1.75358
> 
> There is no space between the value (-1.75358) and the pv name
> (V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I).
> 
> I am using Red Hat Enterprise Linux Workstation release 7.3 (Maipo) with
> R3.15.5.
> 
> Thanks,
> Guobao

Replies:

RE: ca CLI tool display problem Shen, Guobao

References:

ca CLI tool display problem Shen, Guobao

Navigate by Date:

Prev: RE: clone R3.16 error Shen, Guobao

Next: RE: ca CLI tool display problem Shen, Guobao

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: ca CLI tool display problem Shen, Guobao

Next: RE: ca CLI tool display problem Shen, Guobao

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024