Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: ca CLI tool display problem
From: "Shen, Guobao" <gshen1@aps.anl.gov>
To: "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Fri, 14 Jul 2017 15:47:34 +0000
Hi,
Does any one notice the problem with CLI tool with caget?
There is no space in the result between pv name and result.

For example:
$ caget V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I
V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I-1.75358

There is no space between the value (-1.75358) and the pv name (V:1-SR:C30-MG:GIRDER1{QH3:2981}Fld:I).

I am using Red Hat Enterprise Linux Workstation release 7.3 (Maipo) with R3.15.5.

Thanks,
Guobao

Replies:
Re: ca CLI tool display problem Michael Davidsaver

Navigate by Date:
Prev: clone R3.16 error Shen, Guobao
Next: Re: clone R3.16 error Michael Davidsaver
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Re: clone R3.16 error Hu, Yong
Next: Re: ca CLI tool display problem Michael Davidsaver
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 14 Jul 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·