New releases of the following areaDetector modules are available.

 

************************************************************

ADAndor

R2-6 (July 4, 2017)

----

* Changed from using TinyXml to libxml2.  This is used when saving SPE files.  This change was made

  because ADCore R3-0 no longer includes TinyXml and libxml2 is now available for all platforms in ADSupport.

* Fixed medm screen layout for ADCore R3-0.

 

************************************************************

ADAndor3

R2-2 (July 4, 2015)

----

* Fixed medm screen layout for ADCore R3-0.

* Fixed configure/RELEASE for IOC.

 

************************************************************

ADBruker

R2-2 (4-July-2017)

----

* Fixed medm screen layout for ADCore R3-0

* Fixed configure/RELEASE for IOC.

 

************************************************************

ADCSimDetector

R2-5 (July 4, 2017)

========================

* Update constructor for compatibility with ADCore R3-0.

* Fix medm screen layout for ADCore R3-0.

 

************************************************************

ADDexela

R2-1 (July 4, 2017)

----

* Fixed layout of medm screen for ADCore R3-0.

 

************************************************************

ADFireWireWin

R2-2 (04-July-2017)

----

* Fixed medm screen layout for ADCore R3-0.

* Fixed configure/RELEASE for IOC.

 

************************************************************

ADLightField

R2-4 (04-July-2017)

----

* Changed layout of medm screen for ADCore R3-0.

* Changed LightField.template to prevent crashes

  - LFExperimentName to PINI=NO so it does load the experiment at startup. This seems to sometimes cause problems.

  - Set LFRepGateWidth.DRVL = 1.e-10 so it cannot be set to 0.

 

************************************************************

ADMythen

R2-0 (July 4, 2017)

* Driver fixes

  - Allow compiling on Windows

  - Changes to work on big-endian machines

  - Fixed error in writeFloat64; was comparing to NUM_SD_PARAMS, should be FIRST_SD_PARAM

* Fixed medm screen to work with ADCore R3-0

 

************************************************************

ADPSL

R2-1 (July 4, 2017)

----

* Many improvements to the driver.  The initial work was done by Adam Bark from Diamond.

  - Worked with Perceval Guillou at Photonic Science to improve the protocol with the server so it is more

    consistent and easier to parse.  Version 4c3 or later of their server is required to work with

    this release of the EPICS driver.

    Photonic Science says that all of their cameras will work with the new server.

    New DLLs will be needed in some cases.

  - Added a CameraName record to select the camera to control.

  - Implemented the asynEnum interface so that mbbo/mbbi records (CameraName, TriggerMode, FileFormat)

    get their choices from a list provided by the server.  This guarantees that the choices will be valid

    for a specific installation and the selected camera.

  - Added support for color cameras.

  - Improved the report() function.

* Finished the PSLDoc.html documentation, converting from marCCD document.

 

************************************************************

ADPerkinElmer

R2-6 (04-July-2017)

----

* Fixed layout of medm screen for ADCore R3-0.

 

************************************************************

ADPilatus

R2-4 (04-July-2017)

* Only increment NDArrayCounter if the driver got an image.

  When acquiring with `ADNumImages` > 1, `NDArrayCounter`  was immediately incremented before the driver

  confirmed that it actually got an image.

 

************************************************************

ADPluginEdge

R1-2 (05-July-2017)

----

* Changed number of arguments passed to NDPluginDriver base class in constructor for ADCore R3-0.

* Changed size of medm screen for new version of NDPluginBase.adl in ADCore R3-0.

 

************************************************************

ADPointGrey

R2-5 (4-July-2017)

----

* Updated medm screen layout for ADCore R3-0.

 

************************************************************

ADProsilica

R2-3 (05-July-2017)

----

* Fixed layout of medm screen for ADCore R3-0.

 

************************************************************

ADPvCam

R2-2 (05-July-2017)

----

* Fixed configure/RELEASE for IOC.

* Commented out Cygwin builds in Makefiles, no longer works.

 

************************************************************

ADRoper

R2-3 (05-July-2017)

----

* Changed layout of medm screen for ADCore R3-0.

 

************************************************************

ADSimDetector

R2-6 (July 4, 2017)

========================

* Change startup scripts in iocSimDetector.  st.cmd now loads envPaths and st_base.cmd, so it can be

  run with no copying of files.  st.cmd.linux and st.cmd.windows can still be used for conveniently

  switching host architectures in the same directory by copying envPaths to envPaths.linux or envPaths.windows

  as appropriate.

 

************************************************************

ADURL

R2-2 (4-July-2017)

----

* Changed Makefiles to set flags for new version of GraphicsMagick in ADSupport.

* Set SDKVersion and NDDriverVersion in driver.

* Added example GraphicsMagick configuration files (.mgk) to example IOC directory.

* Added some new test TIFF images in the iocURLDriver/images directory.

* Fixed medm files for compatibility with ADCore R3-0.

 

************************************************************

NDDriverStdArrays

R1-2 (July 5, 2017)

====================

* Changed layout of medm screen for ADCore R3-0.

 

************************************************************

pvaDriver

R1-3 (July 5, 2017)

====================

* Change startup scripts in iocPvaDriver.  st.cmd now loads envPaths and st_base.cmd, so it can be

  run with no copying of files.  st.cmd.linux and st.cmd.windows can still be used for conveniently

  switching host architectures in the same directory by copying envPaths to envPaths.linux or envPaths.windows

  as appropriate.

* Changed layout of medm screen for ADCore R3-0.

 

R1-2 (May 9, 2017)

====================

* Reject invalid PV name when creating monitor.