Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: pwm pv
From: Miguel Bordalo <miguel.b.fernandes@gmail.com>
To: EPICS Tech Talk <tech-talk@aps.anl.gov>
Date: Wed, 21 Jun 2017 10:53:55 +0100
​​
Hello,

I have an actuator that is only ON/OFF mode. I would like to turn it on or off proportionally to a certain dutycycle. (i dont wont to turn it on or off faster then a sec, and i would like that the 100% duty would correspond to it turned on during a minute) 

simplest way to do it? 
I saw that there is a pv called pulseTrain, altought i belive i dont have it installed in my RasperryPi epics installation.
Should i proceed with it (how?) or there is a easiest way to do this? 

Thanks in advance
-------------------------------------------------------------------------
Miguel Bordalo

Licenciado em Engenharia Electrotécnica e de Computadores
Instituto Superior Técnico

miguel.b.fernandes@gmail.com


Replies:
Re: pwm pv Wang Xiaoqiang

Navigate by Date:
Prev: Re: LONG INP fields and hexadecimal numbers Ralph Lange
Next: Re: pwm pv Wang Xiaoqiang
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Re: LONG INP fields and hexadecimal numbers Andrew Johnson
Next: Re: pwm pv Wang Xiaoqiang
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 21 Jun 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·