Experimental Physics and Industrial Control System

Hi Mooney,
   I have some more question about the optics.
   We are using the double crystal monochromator( geometry2 ). 
   I read your Instructions：http://www.aps.anl.gov/bcda/synApps/optics/opticsDocs.html

   The difference between the kohzu2Graphic.opi and ours was that, we just have four motors: one for No.2 crystal pitch, one for No.2 crystal raw, one for No.2 crystal move vertically (to adjust the height of lights), and one for bragg angle.
   When I set the st.cmd, I found that only "M_THETA, M_Y, M_Z，GEOM" could be set. I think these were different from our monochromator. I think we should set the mCHI2. And what was the GEOM means?

  Could you give me some suggestion?
Regards,
Liang yx

Replies:

Re: double crystal monochromator Mooney, Tim M.

Navigate by Date:

Prev: Re: Questions about Java channel access client Ebner Simon Gregor (PSI)

Next: Re: Questions about Java channel access client Ralph Lange

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: Questions about Java channel access client Shroff, Kunal

Next: Re: double crystal monochromator Mooney, Tim M.

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024