EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: alh
From: Rolf Keitel <[email protected]>
To: tech_talk <[email protected]>
Date: Fri, 26 May 2017 18:21:05 -0700
I have an alarm PV which needs no acknowledgement and is configured with an input count filter:

$ALARMCOUNTFILTER 3 8

The alarm PV changes from "in alarm" to "out of alarm" once/second for a long time.

I see the following behaviour in alh:

    6 seconds after the alarm starts toggling, the PV goes into alarm.

    After another 6 seconds, the PV goes out of alarm.

    After another 6 seconds, the PV goes into alarm again.

    .........


Is this expected behaviour? I would have expected the PV to stay in alarm until a period of 8 seconds happens with no alarm condition.

- rolf -

--
+-------------------------------------------------------+
| Rolf Keitel, Ph.D.                Tel: (604) 222-7453 |
| TRIUMF                                                |
| Vancouver, B.C., Canada                               |
+-------------------------------------------------------+


Navigate by Date:
Prev: Re: ADSimDetector Michael Davidsaver
Next: Re: alh Andreas Lüdeke
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: ADSimDetector Michael Davidsaver
Next: Re: alh Andreas Lüdeke
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024