Experimental Physics and Industrial Control System
Mark sent me a suggestion of the same thing. I am still curious about the binding however. Is there a good tutorial on those?
Thank you,
Iain.
> -----Original Message-----
> From: Michael Davidsaver [mailto:[email protected]]
> Sent: Monday, May 22, 2017 11:58 AM
> To: Iain Marcuson <[email protected]>; tech-
> [email protected] >> EPICS Tech Talk <[email protected]>
> Subject: Re: Disabling a record from scanning during a program event
>
> On 05/22/2017 11:26 AM, Iain Marcuson wrote:
> > I have a setup that acquires an image from custom AreaDetector code for a
> custom camera. The controller provides a command that returns the
> progress of an acquisition, since they can be quite long. I have created a PV
> to query the progress of the acquisition, querying every 0.2 seconds. I only
> want to scan when an acquisition is in progress. I assume I would
> appropriately set the DISV and DISA fields of the progress PV. However, I am
> lost at how I would set these variables from the acquisition code. Is there an
> example or description of the bindings?
>
> You might be able to point the SDIS link at the Acquire record. Use the CP
> link modifier. The value read from SDIS is stored in DISA. So setting DISV==0
> should disable the scan when Acquire==0.
- Replies:
- Re: Disabling a record from scanning during a program event Johnson, Andrew N.
- References:
- Disabling a record from scanning during a program event Iain Marcuson
- Re: Disabling a record from scanning during a program event Michael Davidsaver
- Navigate by Date:
- Prev:
Re: Disabling a record from scanning during a program event Michael Davidsaver
- Next:
RE: Disabling a record from scanning during a program event Iain Marcuson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Disabling a record from scanning during a program event Michael Davidsaver
- Next:
Re: Disabling a record from scanning during a program event Johnson, Andrew N.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024