Subject: |
Re: sending pickled python objects of epics channel access |
From: |
"Kasemir, Kay" <[email protected]> |
To: |
EPICS Tech Talk <[email protected]> |
Date: |
Tue, 16 May 2017 04:42:22 +0000 |
Hello:
From: Ralph Lange
>+1 for using pvAccess.
>
>Not only would that remove the need for a mailbox waveform record on an IOC somewhere, ..
For what it's worth, you might not need a mailbox IOC.
You can use python + pcaspy as the 'server', and then python + PyEpics or Jython in the CS-Studio display as the client.
So the pickled data goes via Channel Access byte waveform from python server to python/jython client without an intermediate mailbox IOC.
-Kay
- Replies:
- Re: sending pickled python objects of epics channel access Wang Xiaoqiang
- References:
- sending pickled python objects of epics channel access Madden, Timothy J.
- Re: sending pickled python objects of epics channel access Andrew Johnson
- Re: sending pickled python objects of epics channel access Kasemir, Kay
- Re: sending pickled python objects of epics channel access Ralph Lange
- Navigate by Date:
- Prev:
Re: sending pickled python objects of epics channel access Ralph Lange
- Next:
Re: OPC UA EPICS device support license Ralph Lange
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: sending pickled python objects of epics channel access Ralph Lange
- Next:
Re: sending pickled python objects of epics channel access Wang Xiaoqiang
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
|