I am having two EPICS PVs. The details are follows.
record(ai,"NB-NB1C:temperature")
{
field(DTYP,"Raw Soft Channel")
field(HOPR,"1000")
field(INP,"NB-NB1C:setpoint")
field(LINR,"typeJdegC")
field(LOPR,"Raw Soft Channel")
field(PREC,"4")
}
{
field(DRVH,"10000")
field(DRVL,"-10000")
field(FLNK,"NB-NB1C:temperature")
field(HOPR,"10000")
field(LOPR,"-10000")
}
I want when I type any value of voltage in "NB-NB1C-setpoint", I should get the corresponding temperature value in "NB-NB1C-temperature". Can I get help hoe to use LINR field?