EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: using LINR EPICS record
From: palak shimpee <[email protected]>
To: [email protected]
Date: Thu, 11 May 2017 17:37:55 +0530
I am having two EPICS PVs. The details are follows.

record(ai,"NB-NB1C:temperature")
{
  field(DTYP,"Raw Soft Channel")
  field(HOPR,"1000")
  field(INP,"NB-NB1C:setpoint")
  field(LINR,"typeJdegC")
 field(LOPR,"Raw Soft Channel")
 field(PREC,"4")
}

{
  field(DRVH,"10000")
  field(DRVL,"-10000")
  field(FLNK,"NB-NB1C:temperature")
  field(HOPR,"10000")
 field(LOPR,"-10000")
}

 I want when I type any value of voltage in "NB-NB1C-setpoint", I should get the corresponding temperature value in "NB-NB1C-temperature". Can I get help hoe to use LINR field?

Navigate by Date:
Prev: Re: EPICS CPP 4.6.0 Build Error David Vine
Next: stream quesiton l123173
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: EPICS CPP 4.6.0 Build Error Andrew Johnson
Next: stream quesiton l123173
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
ANJ, 21 Dec 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·