EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Question about autosave ?
From: lzf neu <[email protected]>
To: "[email protected]" <[email protected]>
Date: Tue, 2 May 2017 16:12:44 +0000

hi,


I am new user of autosave and I have two questions to consult you:


1) My PV value refresh every seconds and I want to record them in one minute.

As for test, I set one minute generate 60 sequence files, and then check up each files the time intervales.

The following lines are segment of my st.cmd file:


save_restoreSet_NumSeqFiles(60)             ##//number of sequence files: 60
save_restoreSet_SeqPeriodInSeconds(1)    ##// sequence file per second
iocInit
create_monitor_set("auto1.req",1,"P=RSIS:")  ##//begin save record per second

however, only 10 files generated (from auto1.sav0 to auto1.sav9 ), and the time intervals of pv value between each file are different (auto1.sav0 and auto1.sav1 are 8 seconds; auto1.sav1 and auto1.sav2 are 12  seconds; auto1.sav2 and auto1.sav3 are 8 seconds.......and so on.).

I have no idea the limit time invervals that the autosave can record and the limit sequence files number.


2) Can autosave list all my PV value during 60 seconds with timestamp in one single file and how to do ?


Thanks in advanced and any help will be appreciated !

Zhefu



Replies:
RE: Question about autosave ? Mooney, Tim M.

Navigate by Date:
Prev: RE: EpicsQT and Archiver Appliance Abdalla Ahmad
Next: RE: Question about autosave ? Mooney, Tim M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: Mythen writeFloat64() Mark Rivers
Next: RE: Question about autosave ? Mooney, Tim M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024