Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: Area Detector base class parameters
From: Iain Marcuson <Iain.Marcuson@sydorinstruments.com>
To: "tech-talk@aps.anl.gov >> EPICS Tech Talk" <tech-talk@aps.anl.gov>
Date: Thu, 27 Apr 2017 15:25:52 +0000
I have been reviewing the Area Detector code and examining the interface between C and EPICS.  I am not clear on how parameters from the base class are sent to the detector.  For example, the parameter ADBinX is handled by ADDriver::writeInt32(), but nothing in that function actually outputs the new value to the device.  Where is the transmission occurring?  

Thank you,

Iain Marcuson.

Replies:
RE: Area Detector base class parameters Mark Rivers

Navigate by Date:
Prev: Re: EpicsQT and Archiver Appliance Michael Davidsaver
Next: RE: Area Detector base class parameters Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Re: CA gatway runs away when zero length PV name in UDP search request Anton Derbenev
Next: RE: Area Detector base class parameters Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 29 Sep 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·