Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: caRepeater not found when starting ioc under procServ
From: Michael Westfall <mwestfal@gemini.edu>
To: "tech-talk@aps.anl.gov Talk" <tech-talk@aps.anl.gov>
Date: Tue, 25 Apr 2017 18:08:03 -0300
Hello,

When I start my soft IOC under procserv using the procserv-initd script, the IOC reports that the caRepeater executable can't be located.

This is surely because the PATH variable is not set right in this case. 


The question is how (or where) do you have to set the PATH variable for processes running under procServ using the procserv-initd script?


Thanks...


--
Mike Westfall
Control Systems Software Engineer



Replies:
Re: caRepeater not found when starting ioc under procServ Hinko Kocevar

Navigate by Date:
Prev: Re: dbCa::addAction pausing, 10000 channels to clear Pearson, Matthew R.
Next: RE: EPICS Archiver Appliance does not transfer PVs to "Being archived" Abdalla Ahmad
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Re: dbCa::addAction pausing, 10000 channels to clear Pearson, Matthew R.
Next: Re: caRepeater not found when starting ioc under procServ Hinko Kocevar
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 26 Apr 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·