Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: Bandwidth limits in asyn
From: Iain Marcuson <Iain.Marcuson@sydorinstruments.com>
To: "tech-talk@aps.anl.gov >> EPICS Tech Talk" <tech-talk@aps.anl.gov>
Date: Thu, 20 Apr 2017 19:27:30 +0000
I've been writing an asyn driver to receive data from a camera, but I seem to be hitting some sort of limit.  The total size to transmit is 35280000 bytes, but the connection breaks at around 17640000 bytes.  In a mockup test, I was able to transfer all the data by sending 16k with a pause of 0.5 seconds between each packet.  The receiving routine just buffers all the incoming data until it reads the predetermined amount.  Is there something else I need to be doing to get all the data?

Thank you,

Iain.

Replies:
RE: Bandwidth limits in asyn Mark Rivers

Navigate by Date:
Prev: Re: EPICS V4 Windows build warning messages. Pete Jemian
Next: Re: EPICS V4 Windows build warning messages. Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Re: ioc epics Kasemir, Kay
Next: RE: Bandwidth limits in asyn Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 20 Apr 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·