1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Limit flags not set on motor IOC restart |
From: | <[email protected]> |
To: | <[email protected]> |
Date: | Wed, 12 Apr 2017 13:00:34 +0000 |
Hi, I’m a developer working on the Ibex project at the ISIS neutron source. When setting up some new Galil motors on an instrument, one of our team was surprised when restarting the IOC cleared the high limit flag. On inspection of the motor record, this seems to be because the limit flag is only set when the limit switch is hit and the motor is moving out of range (correct CDIR field). As the CDIR field is read-only, it can’t be autosaved so we don’t
see a way of preserving state of the limit flag when the IOC is restarted. Can anyone suggest a way of preserving the state of the limits short of modifying motorRecord.cc? Many thanks, Adrian |