Experimental Physics and Industrial Control System
Hi Jörn,
> I could not use StreamDevice because of hardware issues. It turned
> out that these devices need special configurations of the serial
> interface which can not be set using the standard asynSerialPort
> driver.
Can you please elaborate on what these settings are?
> In addition there are some commands that need to combine the values
> from more than one PV into the output stream.
Note that this is also possible with streamdevice:
http://epics.web.psi.ch/software/streamdevice/doc/tipsandtricks.html#writemany
-Martin
--
Martin Konrad
Control System Engineer
Facility for Rare Isotope Beams
Michigan State University
640 South Shaw Lane
East Lansing, MI 48824-1321, USA
Tel. 517-908-7253
Email: [email protected]
- Replies:
- Re: Asyn 4-30 Problem on Arm processor Jörn Dreyer
- References:
- Asyn 4-30 Problem on Arm processor Jörn Dreyer
- Re: Asyn 4-30 Problem on Arm processor Jörn Dreyer
- RE: Asyn 4-30 Problem on Arm processor Mark Rivers
- Navigate by Date:
- Prev:
RE: Asyn 4-30 Problem on Arm processor Mark Rivers
- Next:
Streamdevice & variable length data Konrad, Martin
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Asyn 4-30 Problem on Arm processor Mark Rivers
- Next:
Re: Asyn 4-30 Problem on Arm processor Jörn Dreyer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024