EPICS Re: Asyn 4-30 Problem on Arm processor

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: Asyn 4-30 Problem on Arm processor
From:	Jörn Dreyer <[email protected]>
To:	[email protected]
Date:	Fri, 17 Mar 2017 13:02:22 +0100

Hi Mark,

I could not use StreamDevice because of hardware issues. It turned out that 
these devices need special configurations of the serial interface which can not 
be set using the standard asynSerialPort driver. In addition there are some 
commands that need to combine the values from more than one PV into the output 
stream.

Removing PINI in all records did not change the result.

I'm trying now which of the records is causing the problem.
As soon as I include one record with type asynFloat64 it crashes.
 I will try tu run the code on x86_64 under vagrind and see what happens.

Jörn

Replies:: RE: Asyn 4-30 Problem on Arm processor Mark Rivers

References:: Asyn 4-30 Problem on Arm processor Jörn Dreyer; Re: Asyn 4-30 Problem on Arm processor Jörn Dreyer; RE: Asyn 4-30 Problem on Arm processor Mark Rivers

Navigate by Date:: Prev: RE: Asyn 4-30 Problem on Arm processor Mark Rivers; Next: RE: Asyn 4-30 Problem on Arm processor Mark Rivers; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: RE: Asyn 4-30 Problem on Arm processor Mark Rivers; Next: RE: Asyn 4-30 Problem on Arm processor Mark Rivers; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024