Experimental Physics and Industrial Control System

> When I mentioned "the latest release" from asyn, I meant the latest package from this link:
> http://www.aps.anl.gov/epics/modules/soft/asyn/
> which is asyn release R4-30, the same version that Marcin was using.

> After I did an asyn checkout from github I had no more compiling errors for area detector. 
> I am assuming the master on github for asyn is release R4-31, correct?

ADCore R2-5 should build fine with asyn R4-30.  However, the master branch of ADCore (soon to be released as R2-6) requires the master branch of asyn (soon to be released as R4-31).

Mark

________________________________________
From: Nilson Pereira [[email protected]]
Sent: Wednesday, February 15, 2017 3:06 AM
To: Mark Rivers; Marcin Lukaszewski; [email protected]
Subject: Re: Problem compiling areaDetector-2-5

Hello Mark,

Like I said, I am new to EPICS and it is probably my lack of knowledge
that gets in the way.

When I mentioned "the latest release" from asyn, I meant the latest
package from this link:
http://www.aps.anl.gov/epics/modules/soft/asyn/
which is asyn release R4-30, the same version that Marcin was using.

Unfortunately, I have not kept any logs from my failed trials to be more
specific about it.

After I did an asyn checkout from github I had no more compiling errors
for area detector. I am assuming the master on github for asyn is
release R4-31, correct?

Nilson

On 14.02.2017 19:02, Mark Rivers wrote:
>> My solution was to compile asyn from a git checkout instead if using the latest release.
> What do you mean by "using the latest release".  I would like to know about any problems building areaDetector with either the master branch or any set of compatible tagged releases.
>
> Mark
>
> ________________________________
> From: [email protected] [[email protected]] on behalf of Nilson Pereira [[email protected]]
> Sent: Tuesday, February 14, 2017 10:39 AM
> To: Marcin Lukaszewski; [email protected]
> Subject: Re: Problem compiling areaDetector-2-5
>
>
> Hello Marcin,
>
> I am new to EPICS and I am not sure I will be able to help. Anyway, recently, I had a lot of trouble compiling area detector as well. The compiling errors were different than yours but maybe they have the same source.
> My solution was to compile asyn from a git checkout instead if using the latest release.
>
> This was my setup:
>
> Ubuntu 16.04 LTS
> EPICS Base R3.15.5
> Asyn R4-31 (Head of Master on git - 19.1.2017)
> Autosave R5.7.1
> Busy R1.6.1
> Calc R.3.61
> Sequencer R2.2.4
> SScan R2.10
> Area Detector R2.5 with modules (Head of Master on git - 19.1.2017):
> ADCore R2.5
> NDDriverStdArrays R1.0
> ADSupport R1.0
>
> That is quick to try and I hope it works.
>
> Nilson
>
> On 14.02.2017 17:00, Marcin Lukaszewski wrote:
> Hi all,
>
> I am trying to compile areaDetector R2-5 on Ubuntu 16.04 LTS
> I git clone areaDetector, ADCore, ADSupport and ADExample and git checkout to following versions:
>
> areaDetector R2-5
> ADCore R2-5
> ADSupport R1-0
> ADExample R2-2
>
> EPICS setup:
> base 3.15.4
> asyn-4-30
> autosave-5-7-1
> busy-1-6-1
> calc-3-4-2-1
> seq-2-23
> sscan-2-10-1
>
> Below pasties to my areaDetector/configure files:
>
> - areaDetector folder structure   http://pastebin.com/5KmLn7Cb
> - RELEASE_PATHS.local                http://pastebin.com/JbzKhrTE
> - RELEASE_LIBS.local                     http://pastebin.com/Eus4L5Fi
> - RELEASE_PRODS.local                http://pastebin.com/gDSyG2JT
> - CONFIG_SITE.LOCAL                  http://pastebin.com/C7iumVfN
> - RELEASE.local                               http://pastebin.com/a0BsWNAs
>
> After setup above I am trying to make but compilation terminates with the error:
>
> /usr/bin/g++  -D_GNU_SOURCE -D_DEFAULT_SOURCE            -D_X86_64_  -DUNIX  -Dlinux     -O3 -g   -Wall     -DH5_NO_DEPRECATED_SYMBOLS -DH5Dopen_vers=2 -DH5Gcreate_vers=2  -mtune=generic     -m64 -fPIC -I. -I../O.Common -I. -I. -I.. -I../../../include/compiler/gcc -I../../../include/os/Linux -I../../../include       -I/home/eli_sw/epics/R3.15/include/compiler/gcc -I/home/eli_sw/epics/R3.15/include/os/Linux -I/home/eli_sw/epics/R3.15/include      -I/home/eli_sw/epics/support/asyn-4-30/include      -I/home/eli_sw/epics/support/areaDetector-2-5/ADCore/include                    -I/usr/local64/include  -I/usr/include/libxml2     -c ../PosPluginWrapper.cpp
> In file included from ../PosPluginWrapper.cpp:8:0:
> ../PosPluginWrapper.h:11:25: fatal error: NDPosPlugin.h: No such file or directory
> compilation terminated.
> /home/eli_sw/epics/R3.15/configure/RULES_BUILD:234: recipe for target 'PosPluginWrapper.o' failed
> make[4]: *** [PosPluginWrapper.o] Error 1
> make[4]: Leaving directory '/home/eli_sw/epics/support_5_8_at15/areaDetector-2-5/ADCore/ADApp/pluginTests/O.linux-x86_64'
> /home/eli_sw/epics/R3.15/configure/RULES_ARCHS:61: recipe for target 'install.linux-x86_64' failed
> make[3]: *** [install.linux-x86_64] Error 2
> make[3]: Leaving directory '/home/eli_sw/epics/support_5_8_at15/areaDetector-2-5/ADCore/ADApp/pluginTests'
> /home/eli_sw/epics/R3.15/configure/RULES_DIRS:88: recipe for target 'pluginTests.install' failed
> make[2]: *** [pluginTests.install] Error 2
> make[2]: Leaving directory '/home/eli_sw/epics/support_5_8_at15/areaDetector-2-5/ADCore/ADApp'
> /home/eli_sw/epics/R3.15/configure/RULES_DIRS:88: recipe for target 'ADApp.install' failed
> make[1]: *** [ADApp.install] Error 2
> make[1]: Leaving directory '/home/eli_sw/epics/support_5_8_at15/areaDetector-2-5/ADCore'
> /home/eli_sw/epics/R3.15/configure/RULES_DIRS:88: recipe for target '/home/eli_sw/epics/support/areaDetector-2-5/ADCore.install' failed
> make: *** [/home/eli_sw/epics/support/areaDetector-2-5/ADCore.install] Error 2
>
> Full output you can find here: http://pastebin.com/y06WGJwX
>
> Quick check if I have files in correct places gives me:
>
> /home/eli_sw/epics/support/areaDetector-2-5
> → find -name "NDPosPlugin.h"
> ./ADCore/ADApp/pluginSrc/NDPosPlugin.h
>
> /home/eli_sw/epics/support/areaDetector-2-5
> → find -name "PosPluginWrapper.h"
> ./ADCore/ADApp/pluginTests/PosPluginWrapper.h
>
>
> What I am doing wrong? Is there anything else I have to setup to compile areaDetector?
>
> Marcin
>
>
> ________________________________
>
> Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
>
> Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.
>
> Aufsichtsrat: Vorsitzender Dr. Karl Eugen Huthmacher, stv. Vorsitzende Dr. Jutta Koch-Unterseher
> Geschäftsführung: Prof. Dr. Anke Rita Kaysser-Pyzalla, Thomas Frederking
>
> Sitz Berlin, AG Charlottenburg, 89 HRB 5583
>
> Postadresse:
> Hahn-Meitner-Platz 1
> D-14109 Berlin
>
> http://www.helmholtz-berlin.de


________________________________

Helmholtz-Zentrum Berlin für Materialien und Energie GmbH

Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.

Aufsichtsrat: Vorsitzender Dr. Karl Eugen Huthmacher, stv. Vorsitzende Dr. Jutta Koch-Unterseher
Geschäftsführung: Prof. Dr. Anke Rita Kaysser-Pyzalla, Thomas Frederking

Sitz Berlin, AG Charlottenburg, 89 HRB 5583

Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin

http://www.helmholtz-berlin.de

References:

Problem compiling areaDetector-2-5 Marcin Lukaszewski

Re: Problem compiling areaDetector-2-5 Nilson Pereira

RE: Problem compiling areaDetector-2-5 Mark Rivers

Re: Problem compiling areaDetector-2-5 Nilson Pereira

Navigate by Date:

Prev: RE: Problem compiling areaDetector-2-5 Mark Rivers

Next: Re: IOC Connecting Problem Rod Nussbaumer

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Problem compiling areaDetector-2-5 Nilson Pereira

Next: Re: Problem compiling areaDetector-2-5 Andrew Johnson

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024