Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	How access to an array value from a process variable using ca_array_get()?
From:	Raquel Pérez Lázaro <[email protected]>
To:	[email protected]
Date:	Wed, 15 Feb 2017 17:04:04 +0100

Title: Raquel Pérez Lázaro

Hello,

I am trying to read and write to an array value from a process variable using ca_array_get() function, but it is no clear for me how I should use this function in order to access to each element of the array and print its value.

I would appreciate an example.

Thank you,

R. Perez

Raquel Pérez Lázaro

System Engineer

IXION

Julián Camarillo, 21B – 3º
28037 Madrid, España

Phone: +34 91 440 18 33
Ph. dir: +34 91 440 18 48
FAX: +34 91 30 45 410

[email protected]

http://www.ixion.es

Replies:: Re: How access to an array value from a process variable using ca_array_get()? J. Lewis Muir

Navigate by Date:: Prev: RE: Problem compiling areaDetector-2-5 Marcin Lukaszewski; Next: IOC Connecting Problem Pilkyu Jung; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Tech-talk archives & RSS Andrew Johnson; Next: Re: How access to an array value from a process variable using ca_array_get()? J. Lewis Muir; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024