Experimental Physics and Industrial Control System
Hello Mark,
I checked the documentation and it seems like the "ip" module only
supports the New Focus 8750 model. Unfortunately, the 8732 uses a
different set of commands.
I got in contact with Wesley Moore, and he is going to provide a copy of
his solution through github.
I will post the link here on tech talk once it becomes available.
Thank you for your support Mark.
Nilson
On 13.02.2017 18:54, Mark Rivers wrote:
The synApps "ip" module contains the following files:
corvette:ip/ipApp/Db>ls -l *pico*
-rw-rw-r-- 1 epics domain users 99102 Apr 27 2016 picoMotor
-rw-rw-r-- 1 epics domain users 8187 Apr 27 2016 picoMotor.db
-rw-rw-r-- 1 epics domain users 766 Apr 27 2016 picoMotor.substitutions
-rw-rw-r-- 1 epics domain users 93 Apr 27 2016 picoMotor_positions.req
-rw-rw-r-- 1 epics domain users 539 Apr 27 2016 picoMotor_settings.req
-rw-rw-r-- 1 epics domain users 1546 Apr 27 2016 picoStop12.db
-rw-rw-r-- 1 epics domain users 487 Apr 27 2016 picoStop8.db
We are using these with some model of the New Focus Picomotor controller, although I am away from the lab and I am not sure if it is the 8732.
Mark
________________________________________
From: [email protected] [[email protected]] on behalf of Nilson Pereira [[email protected]]
Sent: Monday, February 13, 2017 10:28 AM
To: [email protected]
Subject: Driver for New Focus 8732 Picomotor Multi-Axis Driver
Hello,
I am currently looking into using a New Focus Picomotor Multi-Axis
Driver model 8732 in our beamline here at Bessy II. According to the
list of supported hardware on the EPICS APS website, there should be a
GPIB driver that I cannot find a link to it.
I wonder if someone still have it and could kindly provide a copy of the
driver.
I appreciate any information related to this device.
Thank you
Nilson
________________________________
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.
Aufsichtsrat: Vorsitzender Dr. Karl Eugen Huthmacher, stv. Vorsitzende Dr. Jutta Koch-Unterseher
Geschäftsführung: Prof. Dr. Anke Rita Kaysser-Pyzalla, Thomas Frederking
Sitz Berlin, AG Charlottenburg, 89 HRB 5583
Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin
http://www.helmholtz-berlin.de
________________________________
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.
Aufsichtsrat: Vorsitzender Dr. Karl Eugen Huthmacher, stv. Vorsitzende Dr. Jutta Koch-Unterseher
Geschäftsführung: Prof. Dr. Anke Rita Kaysser-Pyzalla, Thomas Frederking
Sitz Berlin, AG Charlottenburg, 89 HRB 5583
Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin
http://www.helmholtz-berlin.de
- References:
- Driver for New Focus 8732 Picomotor Multi-Axis Driver Nilson Pereira
- RE: Driver for New Focus 8732 Picomotor Multi-Axis Driver Mark Rivers
- Navigate by Date:
- Prev:
RE: Basler HD Camera device support tom.cobb
- Next:
Re: Sequencer remote pvPut CA delay (specified behavior?) Benjamin Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: Driver for New Focus 8732 Picomotor Multi-Axis Driver Mark Rivers
- Next:
Basler HD Camera device support Gianluca Borgese
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
<2017>
2018
2019
2020
2021
2022
2023
2024