Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: DENEX detector with FAST ComTec MCS6A digitzer
From: "Hartman, Steven M." <hartmansm@ornl.gov>
To: EPICS Tech Talk <tech-talk@aps.anl.gov>
Date: Wed, 8 Feb 2017 18:45:42 +0000
One of our beam lines is planning to purchase a DENEX 300TN 2D detector (http://www.denex-gmbh.de/detektoren.php?sprache=eng). This would come with the MCS6A digitizer from FAST ComTec (https://www.fastcomtec.com/products/ufm/multiscaler-tof-mcs6a/). The digitizer comes with a Windows application, but a Windows DLL and a Linux driver are also available for integration with other software. 

Does anyone have any experience with such a detector / digitizer? Any previous attempts with EPICS integration? We would prefer to use Linux.

Thanks,
-- 
Steven Hartman
hartmansm@ornl.gov








Navigate by Date:
Prev: Re: [epics-modules/asyn] Throw exception if we can't register interfaces (#43) Eric Norum
Next: Re: [epics-modules/asyn] Throw exception if we can't register interfaces (#43) Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Re: [epics-modules/asyn] Throw exception if we can't register interfaces (#43) Ralph Lange
Next: Re: edm 1-12.40 on epics 3.14.12 bob.anderson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 14 Feb 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·