Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017 Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
<== Date ==> <== Thread ==>

Subject: Using synApps calc in simple IOC
From: Iain Marcuson <Iain.Marcuson@sydorinstruments.com>
To: "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Fri, 3 Feb 2017 21:36:06 +0000
I am attempting to test synApps calc in a simple IOC to use in a later project.  I have been following the instructions from:
http://www.aps.anl.gov/epics/docs/APS2014/11-Creating-IOCs.pdf

for creating the IOC.  I have included the path to synApps calc in 
configure/RELEASE

but when I start the IOC I get the message:
Record "name" is of unknown type "acalcout"

Adding
dbLoadDatabase("${CALC}/dbd/calc.dbd")

fails when the includes specified in calc.dbd cannot be found.

Doing a cd to "${CALC}/dbd" followed by an include fails when trying to include dbCommon.

Thank you for your consideration.

Iain.


Replies:
RE: Using synApps calc in simple IOC Mooney, Tim M.

Navigate by Date:
Prev: Re: Command omsMAXnetConfig not found David Vine
Next: RE: Using synApps calc in simple IOC Mooney, Tim M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
Navigate by Thread:
Prev: Re: Command omsMAXnetConfig not found David Vine
Next: RE: Using synApps calc in simple IOC Mooney, Tim M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017
ANJ, 14 Feb 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·