| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 <2017> 2018 2019 2020 2021 2022 2023 2024 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Problem NFS mounting Centos 7 file systems from vxWorks 5.5 |
| From: | Jeong Han Lee <[email protected]> |
| To: | [email protected] |
| Date: | Thu, 19 Jan 2017 09:01:50 +0100 |
Hi Mark,According to your email, the following my comment may not be valid, but better to check it out.
Do you enable firewall service? CentOS7 uses the NFSv4 as default as Torsten mentioned, that use only 2049 port [1]. With the firewall commands as systemd's definition, you can open that port. However, NFSv3 uses the more than one port, and all ports are allocated when the service is started dynamically. So, you have to define unused ports manually before the NFSv3 service is started and open these ports later (via systemd with firewalld or others... )
I hope it may help you to resolve that issue. Thanks, Han ----[1] https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Security_Guide/sec-Securing_Services.html#sec-Securing_NFS
4.3.7.5. NFS Firewall Configuration On 01/19/2017 02:00 AM, Mark Rivers wrote:
Folks, We are mostly running VxWorks 6.9.4 now, and with that we have no problem NFS mounting file systems on Centos 7. However, we have a few IOCs that still need to run VxWorks 5.5. These can mount file systems on Centos 5 servers fine. However, on Centos 7 we see the following: - The NFS mount command from vxWorks succeeds with no error - showmount on the Centos 7 system shows that the vxWorks system has mounted the file system OK - However, the vxWorks system cannot actually read or write any files on the file system. If I type the “ls” command in a valid directory I get Cant’ open “null”. Value=-1 The problem is not file permissions, it works fine if we are running the identical IOC with vxWorks 6.9.4, and we have tried setting the files in that directory to mode 755. Is anyone running vxWorks 5.5 with a Centos 7/ RHEL 7, etc. modern NFS server? If so, how does one get it to work? Thanks, Mark