EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Looking for someone to help building the control system of XAFS/XRF beamline at SESAME
From: Mark Rivers <[email protected]>
To: Messaoud Harfouche <[email protected]>
Cc: "[email protected]" <[email protected]>
Date: Tue, 10 Jan 2017 15:51:17 +0000
Could you list more specifically the hardware on the beamline (motor controllers, counter/timers, other detectors, etc.). What computer platform will you use, and what are the requirements for the end user software?

Mark


Sent from my iPhone

On Jan 10, 2017, at 5:01 AM, Messaoud Harfouche <[email protected]<mailto:[email protected]>> wrote:

Dear EPICS community

The SESAME light source project is very close to having first beam in the storage ring. This would be first for Science in the  Middle East. It now faces the unfortunate situation that first beamlines are not ready. As part of completing the XAFS /XRF beamlines there is work to do in delivering the beamline controls system.

I would like to ask if someone is prepared to help work with SESAME to delivering the initial beamline control system. I am thinking it will take a substantial part of 6 month of someone’s effort, with a latter phase needing to be at SESAME. I realise that controls and software effort is tight for many projects, but for SESAME to achieve an operational beamline is monumental step. I think this could be achieved with support and agreement from a lab management or as an individual.

Immediate needs are basic motor control with some pseudo motors for optics in addition to the implementation of the detector readings to EPICS such as our SCA DXP mercury from XIA. This could start by working remotely than through visiting SESAME, outside Amman in Jordan,  supported by SESAME for implementation debugging/refinements.

Many thanks for considering this.

Regards.


----------------------
Dr. Messaoud Harfouche

XRF/XAFS Beamline Scientist/Manager

Synchrotron-light for Experimental and Scientific
Applications in the Middle East (SESAME)

P.O. Box 7, Allan 19252, Jordan,
Tel: +962 5 3511348, ext. 303
Mobile: +962 7 98932327
Fax: +962 53511423





Replies:
RE: Looking for someone to help building the control system of XAFS/XRF beamline at SESAME Messaoud Harfouche
References:
Looking for someone to help building the control system of XAFS/XRF beamline at SESAME Messaoud Harfouche

Navigate by Date:
Prev: DSO missing from command line Error in Ubuntu 16.04 LTS Shantonu Sahoo
Next: ASYN VXI-11 Eric Norum
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Looking for someone to help building the control system of XAFS/XRF beamline at SESAME Messaoud Harfouche
Next: RE: Looking for someone to help building the control system of XAFS/XRF beamline at SESAME Messaoud Harfouche
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
ANJ, 21 Dec 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·