EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: synApps_5_8 build error
From: Mark Rivers <[email protected]>
To: "Abdalla Ahmad" <[email protected]>, "[email protected]" <[email protected]>
Date: Mon, 9 Jan 2017 13:24:42 +0000
> The weird thing that it happens only with this module.

Which module is it happening with?  The error messages in your original message are not complete, so they don't show which module was being built when you got those errors.

Mark

________________________________________
From: Abdalla  Ahmad [[email protected]]
Sent: Monday, January 09, 2017 1:12 AM
To: Mark Rivers; [email protected]
Subject: RE: synApps_5_8 build error

Hello Mark

Yes it fixes the problem by hard coding the paths not using env. The weird thing that it happens only with this module.

Regards,

Abdalla.

-----Original Message-----
From: Mark Rivers [mailto:[email protected]]
Sent: Sunday, January 08, 2017 3:50 PM
To: Abdalla Ahmad <[email protected]>; [email protected]
Subject: RE: synApps_5_8 build error

If you change /home/control/epics/support/synApps_5_8/support/configure/RELEASE to define

SUPPORT=/home/control/epics/support/synApps_5_8/support/
EPICS_BASE=/home/control/epics/base-3.14.12.3

does that fix the problem?  Maybe it is not picking up the environment variables correctly.

Mark

________________________________
From: [email protected] [[email protected]] on behalf of Abdalla Ahmad [[email protected]]
Sent: Sunday, January 08, 2017 12:26 AM
To: [email protected]
Subject: synApps_5_8 build error

Hi

I downloaded the mentioned version of synApps and I modified SUPPORT and EPICS_BASE in configure/RELEASE file as:

SUPPORT=$(SYNAPPS_SUPPORT)
EPICS_BASE=$(ENV_EPICS_BASE)

These variables are already defined in .bashrc and exported. The list of modules for our site is

Asyn
Allen_Bradlley
Autosave
Busy (Added to resolve a similar error at compiling asyn ) Calc IP IPAC Motor SNCSEQ SSCAN STREAM

Executing 'make release' then make gives the following:

Definition of SNCSEQ conflicts with SUPPORT support.
In this application a RELEASE file defines
                SNCSEQ = /home/control/epics/support/synApps_5_8/support/seq-2-2-1
but SUPPORT at /home/control/epics/support/synApps_5_8/support defines
                SNCSEQ = /seq-2-2-1
Definition of EPICS_BASE conflicts with SUPPORT support.
In this application a RELEASE file defines
                EPICS_BASE = /home/control/epics/base-3.14.12.3
but SUPPORT at /home/control/epics/support/synApps_5_8/support defines
                EPICS_BASE =
Definition of SUPPORT conflicts with SUPPORT support.
In this application a RELEASE file defines
                SUPPORT = /home/control/epics/support/synApps_5_8/support
but SUPPORT at /home/control/epics/support/synApps_5_8/support defines
                SUPPORT =

I have no clue of where these wrong definitions are. I thought of giving hard coded paths for the aforementioned variables instead of env ones and the build works fine. I believe on synApps 5.6 we did not face that error.

Best Regards,

Abdalla Ahmad
Control Engineer
SESAME
Allan, Jordan.
Tel: (+962-5) 3511348 , ext. 265
Fax: (+962-5) 3511423
Mob: (+962-7)88183296
www.sesame.org.jo<http://www.sesame.org.jo/>



References:
synApps_5_8 build error Abdalla Ahmad
RE: synApps_5_8 build error Mark Rivers
RE: synApps_5_8 build error Abdalla Ahmad

Navigate by Date:
Prev: RE: Asyn and devices with changing register map tom.cobb
Next: Multiple OS Build Hugo Slepicka
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: synApps_5_8 build error Abdalla Ahmad
Next: Multiple OS Build Hugo Slepicka
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <20172018  2019  2020  2021  2022  2023  2024 
ANJ, 21 Dec 2017 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·