EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Default value to field SCAN
From: Gabriel de Souza Fedel <[email protected]>
To: "[email protected]" <[email protected]>
Date: Tue, 3 Jan 2017 09:57:28 -0200 
Hi,
When I create records and don't set the field SCAN, what is the default value? There is an way to change this?
I'm having problems with a set of records without SCAN field that are consuming a lot of CPU, and receiving this messages: 

dbScan warning from '.2 second' scan thread:
        Scan processing averages 0,00 seconds (0,00 .. 0,02).
        Over-runs have now happened 283681 times in a row.
        To fix this, move some records to a slower scan rate.

dbScan warning from '.5 second' scan thread:
        Scan processing averages 0,00 seconds (0,00 .. 0,03).
        Over-runs have now happened 290049 times in a row.
        To fix this, move some records to a slower scan rate.

dbScan warning from '.1 second' scan thread:
        Scan processing averages 0,00 seconds (0,00 .. 0,03).
        Over-runs have now happened 278431 times in a row.
        To fix this, move some records to a slower scan rate.
If i remove small choices from dbd file (.1, .2 and .5 seconds) solves the problem. Apparently the records are being created with all SCAN values...some idea to solve this? 

Regards,

--
Gabriel Fedel
Software de Operação das Linhas de Luz
Laboratório Nacional de Luz Síncrotron – (LNLS)
Centro Nacional de Pesquisa em Energia e Materiais (CNPEM)
[email protected] | +55 (19) 3512 1226
www.lnls.cnpem.br
Replies:
Re: Default value to field SCAN Henrique Almeida
RE: Default value to field SCAN Mark Rivers
Re: Default value to field SCAN Andrew Johnson
Navigate by Date:
Prev: Re: Asyn support Stefen Paul
Next: Re: Default value to field SCAN Henrique Almeida
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: Installing areadetector on raspberry-pi2 OS raspbian pixels Mark Rivers
Next: Re: Default value to field SCAN Henrique Almeida
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  <2017>  2018  2019  2020  2021  2022  2023  2024