Experimental Physics and
Industrial Control System

Dear colleagues,

I am trying to make the configuration files for MCA or LabCA on a Scientific Linux 64bit machine and I am get the errors at the bottom of the email.

While searching for an answer I learnt probably the problem is within the fact that both MCA and LabCA are for a 32 bit pc. How to make MCA and LabCA compatible for a 64 bit version of MATLAB?

Is this the real issue or am I missing something else?

Many thanks for your support,

best regards,

Giovanna

-------------------------------------------------

Errors reports

when trying to make MCA

/local/MATLAB/R2016b/bin/mex" -v -I/opt/codac-4.1/epics/base/include -I/opt/codac-4.1/epics/base/include/os/Linux -DEPICS_DLL_NO -L/opt/codac-4.1/epics/base/lib/linux-x86_64 -ldbStaticHost -lCom -lca mca.cpp MCAError.cpp Channel.cpp -O O.linux-x86_64/mca.mexglx
Verbose mode is on.

when trying to make LabCA
make -C ./configure install
make[1]: Entering directory `/home/codac-dev/MATLAB/labca_3_5_0/configure'
make -C O.linux-x86_64 -f ../Makefile TOP=../.. T_A=linux-x86_64 install
make[2]: Entering directory `/home/codac-dev/MATLAB/labca_3_5_0/configure/O.linux-x86_64'
perl /opt/codac-4.1/epics/base/bin/linux-x86_64/convertRelease.pl checkRelease
make[2]: Leaving directory `/home/codac-dev/MATLAB/labca_3_5_0/configure/O.linux-x86_64'
make[1]: Leaving directory `/home/codac-dev/MATLAB/labca_3_5_0/configure'
make -C ./ezca install
make[1]: Entering directory `/home/codac-dev/MATLAB/labca_3_5_0/ezca'
make -C O.linux-x86_64 -f ../Makefile TOP=../.. T_A=linux-x86_64 install
make[2]: Entering directory `/home/codac-dev/MATLAB/labca_3_5_0/ezca/O.linux-x86_64'

/usr/bin/gcc -c  -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_SOURCE=500           -D_X86_64_  -DUNIX  -D_BSD_SOURCE -Dlinux  -D_REENTRANT   -O3 -g   -Wall     -g  -m64     -fPIC -MMD -I. -I../O.Common -I. -I.. -I../../include/os/Linux -I../../include         ../ezca.c
make[2]: Leaving directory `/home/codac-dev/MATLAB/labca_3_5_0/ezca/O.linux-x86_64'
make[1]: Leaving directory `/home/codac-dev/MATLAB/labca_3_5_0/ezca'

--

Giovanna Campogiani

Accelerator Physics PhD Student

Electronics Engineer

Sapienza University of Rome

INFN - National Institute of Nuclear Physics

e-mail: [email protected]