Experimental Physics and
Industrial Control System

"Priller, John" <[email protected]> · Mon, 26 Sep 2016 10:47:26 +0000

We developed and tested some asyn/stream support for the Danfysik 9100 at NSCL/FRIB.  It's not a full-blown IOC but just a stream protocol file and a database template to go with it.  But if anyone wants to use those as a starting point I can send them the files.

On 9/26/2016 4:41 AM, Jeong Han Lee wrote:
> Hi,
>
>     One of ESS system also may use a Danfysik System 8500, so I am 
> interested in to see that any existent EPICS IOC available. If anyone 
> has it, please let me know.
>
>     Thanks,
>     Han
>
>
> On 01/28/2016 08:41 PM, Schrock, Ken wrote:
>> Hello,
>>
>>
>>
>> We are purchasing several Danfysik model 9100 power supplies for FRIB at
>> MSU.  Before developing a new EPICS driver, we are curious if any users
>> already have one for either the 8500 or 9100?  Danfysik told us that the
>> command set is the same for both models.
>>
>>
>>
>> Regards,
>>
>>
>>
>> *Ken Schrock*
>>
>> Electrical Staff Engineer
>>
>> Facility for Rare Isotope Beams
>>
>> Michigan State University
>>
>> 640 South Shaw Lane
>>
>> East Lansing, MI 48824, USA
>>
>> Tel. 517-908-7193
>>
>> Email: [email protected] <mailto:[email protected]>
>>
>> 	
>>
>> *cid:[email protected]*
>>
>> 	
>>
>> * *
>>
>>
>>
>>
>>
>>
>>

-- 
John A. Priller             | Phone : (517) 908-7375
MSU Cyclotron Laboratory    | Email : [email protected]
640 S. Shaw Lane room 4220Z | Web   : http://people.nscl.msu.edu/~priller/
East Lansing, MI 48824      |

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System