Experimental Physics and
Industrial Control System

Hi David, 

We, at STAR collaboration at Brookhaven National Lab, are planning to use CAEN SY4527.  We are, for the most part, using built-in EPICS IOC on it.  There are a few thing that the CAEN’s built-in EPICS would not do; for that, we are using a soft IOC running on a Linux to deal with that (mostly, we wanted to ramp in particular way). 

I assume you have looked at that, but thought give one feedback on that.  If you would like I can pass you the student’s name/e-mail who is working on the CAEN control.  

> On Sep 6, 2016, at 2:42 AM, David Brodrick <[email protected]> wrote:
> 
> Hi,
> We've seen the CLS IOC [1] for the CAEN power supplies, but the CAEN HVwrapper library has been updated since the last release of that IOC.
> 
> Before we put any effort into it, I was wondering if anybody has EPICS support for these mainframes using recent versions of the CAEN library?
> 
> These supplies now have an integrated IOC, but we're interested in seeing what else is available as well.
> 
> Thanks in advance,
>  David
> 
> [1] http://exshare.lightsource.ca/OpenSource/Software/Forms/AllItems.aspx
> EPICS->HVCAENx527->HVCAENx527-1-3

References:

Support for CAEN SY4527 David Brodrick

Navigate by Date:

Prev: Re: Question about return ping value by using pcaspy in camonitor Wang Xiaoqiang (PSI)

Next: Autosave ignores PVs starting with some characters Konrad, Martin

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Support for CAEN SY4527 David Brodrick

Next: Question about return ping value by using pcaspy in camonitor lzf neu

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024