Experimental Physics and
Industrial Control System

Hi,
I am having a 32-bit linux.

> ---------------------------- Original Message ----------------------------
> Subject: RE: installation of synapps_5_8 in ubuntu
> From:    "Mark Rivers" <[email protected]>
> Date:    Tue, August 16, 2016 4:56 pm
> To:      "[email protected]" <[email protected]>
>          "[email protected]" <[email protected]>
> --------------------------------------------------------------------------
>
> Are you running a 32-bit or 64-bit version of Linux?  You are building the
> 32-bit version of EPICS (linux-x86).  If you have a 64-bit Linux system it
> is possible that you are missing some 32-bit libraries and you should do
> the following
>
> export EPICS_HOST_ARCH=linux-x86_64
>
> Then you will be building for 64-bit EPICS.  See if that also gets an
> error.
>
> Mark
>
> ________________________________________
> From: [email protected] [[email protected]] on
> behalf of Mark Rivers [[email protected]]
> Sent: Tuesday, August 16, 2016 6:17 AM
> To: [email protected]; [email protected]
> Subject: RE: installation of synapps_5_8 in ubuntu
>
> You should send the complete output when you build in the autosave
> directory
>
> make clean uninstall
> make
>
> Mar
>
> ________________________________________
> From: [email protected] [[email protected]] on
> behalf of [email protected] [[email protected]]
> Sent: Tuesday, August 16, 2016 6:11 AM
> To: [email protected]
> Subject: installation of synapps_5_8 in ubuntu
>
> Hi,
>   I have copied synapps_5_8 under '/opt/epics'.
> epics-base is already build under /opt/epics/base-3.15.3
> msi is under /opt/epics/extensions/src/msi1.7
>
> When I am trying to build synapps with areaDetector by using 'make'
> command
> I am getting following errors.
>
> /opt/epics/synApps_5_8/support/autosave-5-6-1/lib/linux-x86/libautosave.so:
> undefined reference to `_dl_sysinfo'
> /opt/epics/synApps_5_8/support/autosave-5-6-1/lib/linux-x86/libautosave.so:
> undefined reference to `__syscall_error'
> collect2: error: ld returned 1 exit status
>
> I am new to linux and could not get any suggestions from google.
> Please help me
> Thank you.
>
>
>
>

References:

installation of synapps_5_8 in ubuntu avanish

RE: installation of synapps_5_8 in ubuntu Mark Rivers

RE: installation of synapps_5_8 in ubuntu Mark Rivers

Navigate by Date:

Prev: RE: installation of synapps_5_8 in ubuntu Mark Rivers

Next: RE: installation of synapps_5_8 in ubuntu avanish

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: installation of synapps_5_8 in ubuntu Mark Rivers

Next: RE: installation of synapps_5_8 in ubuntu avanish

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024