Hi,
A bit of off topic, but we are trying to use a CAEN SY4527 to replace our old aging LeCroy 1458 at STAR Experiment at Brookhaven National Lab. So far, everything is working out very well with the built-in EPICS IOC in the CAEN SY4527 that we have. We have one question to anybody who have an experience or idea on what to do about it.
Turns out, since there are two high voltage settings available on a CAEN SY4527; v0set and v1set. As far as we can tell, which is being used it determined by VSEL input value on the CAEN SY4527. We know that can be switched via NIM signal on the crate. The question is that is there any other way to switch from v0set to v1set? In other words, is there a register that can be read and written that will allow us to change one set of voltage to another, preferably via EPICS?
As far as I can tell, the older CAEN crates such as SY2527s do the same thing; I see the exact same entry on the manual for SY4527 and SY2527. So, if anybody who uses older CAEN HV systems who knows anything of it, I really appreciate the information.
- Navigate by Date:
- Prev:
Re: gddAppFuncTableStatus string pthomas
- Next:
Re: MRF EVG, EVR, and EVM's Linux Kernel modules Michael Davidsaver
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: MRF EVG, EVR, and EVM's Linux Kernel modules Michael Davidsaver
- Next:
error when i do as howtodoserial_stramdevice.html said l123173
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
|