Experimental Physics and
Industrial Control System

Hi Kaz,

For figuring out the communications problem you should enable asynTrace in st.cmd immediately after the call to drvAsynIPPortConfigure.  Then we will have a trace of all of the communications between the IOC and the LabView socket server.

Mark

________________________________
From: Gofron, Kazimierz [[email protected]]
Sent: Monday, June 13, 2016 6:02 PM
To: '[email protected]'; Mark Rivers; [email protected]
Subject: RE: Merlin and AreaDetector


Hi Giles,



I increased a timeout to 10 [s], but that did not resolve the labview messages in the IOC.


I have looked more into frame size with hex editor. The Labview .mib image header shows image size of 515x515.
There are 7 (00) bytes at offset $2A0
Data from $2B0 : $81B00
There are 2 bytes at offset $81B10
Total “image” bytes 530528+7+2=530537, is larger than expected 530532 (512 x 512 image).

Kaz

References:

Merlin and AreaDetector Gofron, Kazimierz

RE: Merlin and AreaDetector Mark Rivers

RE: Merlin and AreaDetector Gofron, Kazimierz

RE: Merlin and AreaDetector Mark Rivers

RE: Merlin and AreaDetector giles.knap

RE: Merlin and AreaDetector Gofron, Kazimierz

Navigate by Date:

Prev: RE: Merlin and AreaDetector Gofron, Kazimierz

Next: Open Positions at SLAC: Senior Software Application Developer and Architect Williams Jr., Ernest L.

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: Merlin and AreaDetector Gofron, Kazimierz

Next: Open Positions at SLAC: Senior Software Application Developer and Architect Williams Jr., Ernest L.

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024