Hi Ana,
I had a go at this, and I have a version that builds and runs (on Windows) with the current libraries.
However, I ran out of resource to complete the task, in the way that I would have liked to.
I did, specifically, test it with the PCI-6601 card, of which we have a stock here.
I retain an ongoing interest in this, and would like to come back to it ‘some time’.
Cheers,
Peter.
From: [email protected] [mailto:[email protected]]
On Behalf Of Ana Malagon
Sent: 10 May 2016 01:49
To: [email protected]
Subject: EPICS support with NI-Daqmx
I'm trying to integrate a National Instruments compact daq (9184), and thought I'd ask if anybody has recently worked on EPICS support for this device, or other devices that also need the National Instruments
NI-Daqmx library? I was looking through the tech-talk archives and found one lead:
but looks like this project doesn't work with recent versions of base and asyn. Just wanted to see if anyone has worked on this sort of problem recently so as not to reinvent the wheel - thanks!