EPICS Home EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

Format page
for printing


Search Tech-talk
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: version of base and extension
From: l123173 <[email protected]>
To: [email protected]
Date: Mon, 9 May 2016 21:21:30 +0800 (CST)
Hi everyone,
    Recently, I will give a talk about how to install and use epics.  Just an easy instrucion, I am not good at epics.
   So, I want to know. On the web, there is the base R3.15 and R3.16, but extensions was R3.14 or R3.13. Does they confict? I mean that was base R3.16 suitable with extension R3.14?

Thanks,
Li x


 
Replies:
Re: version of base and extension Andrew Johnson
Navigate by Date:
Prev: Re: Required help about mobbus tcp module Dirk Zimoch
Next: StreamDevice: Flags and Checksum Pseudo-Converter Help Kyle Hesse
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Job opening for software engineer position at FRIB/MSU Shen, Guobao
Next: Re: version of base and extension Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <2016>  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 15 Jul 2016 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·