Hi,
I can't see my output from asynPrint.
I turn on debugging using the asynRecord.opi (masks are 0x1F and
0x7, and I set the filename), and the log file is created and
contains 'other' messages. But messages I try to generate are
absent. I
am seeing lots of events such as these:
2016/04/26 09:34:08.344 Camera1 addr -1 queueRequest priority 0
not lockHolder
2016/04/26 09:34:08.344 asynManager::portThread port=Camera1
callback
2016/04/26 09:34:08.344 asynPortDriver:readFloat64: function=44,
value=2.872490
2016/04/26 09:34:08.344 RIXSCam1:Camera1:PoolUsedMem
devAsynFloat64 process value=2.872490
My code looks (e.g.) like this:
asynPrint(this->pasynUserSelf, ASYN_TRACE_FLOW,
"%s:%s: New CCD power setting detected\n",
_driverName, functionName);
What might cause this to fail to output anything? Do I need to
call some initialization function?
Thanks,
Phil
--
Pixel
Analytics is a limited company registered in England.
Company number: 7747526; Registered office: 93A New Road,
Haslingfield, Cambridge CB23 1LP