Experimental Physics and Industrial Control System
|
Hey,
thank you all for your explanation and reasons for using PLCs.
From these answers we will have to use PLCs for the
control/monitoring
of our system, since EPS will be a point here.
Florian
On 04/05/2016 08:40 PM, bob dalesio
wrote:
I melted a
vacuum valve when the interlock did not test that the valve
was Fully Openned and failed to test that it was also NOT
FULLY Closed. When the intermediate electronics were unplugged
- both the open and closed limit switch were true. It looked a
lot like this one.
Bob
--
----------------------------------------
| Dr. Florian Feldbauer |
| |
| Helmholtz-Institut Mainz / |
| Johannes Gutenberg-Universität Mainz |
| Johann-Joachim-Becher-Weg 36 |
| D-55128 Mainz |
| |
| Office: SB1 / 00-213 |
| Phone: (+49)6131 / 39-29608 |
----------------------------------------
|
- References:
- Controlling vacuum valves with EPICS Florian Feldbauer
- RE: Controlling vacuum valves with EPICS Mark Rivers
- Re: Controlling vacuum valves with EPICS Michael Davidsaver
- RE: Controlling vacuum valves with EPICS Mark Rivers
- Re: Controlling vacuum valves with EPICS bob dalesio
- Navigate by Date:
- Prev:
Re: Controlling vacuum valves with EPICS bob dalesio
- Next:
Re: Looking for an embedded systems engineer Jeong Han Lee
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Controlling vacuum valves with EPICS bob dalesio
- Next:
Re: Controlling vacuum valves with EPICS Pete Jemian
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
<2016>
2017
2018
2019
2020
2021
2022
2023
2024
|
ANJ, 15 Jul 2016 |
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·
·
Search
·
EPICS V4
·
IRMIS
·
Talk
·
Bugs
·
Documents
·
Links
·
Licensing
·
|