EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <20162017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <20162017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: way of auto move and record
From: l123173 <[email protected]>
To: [email protected]
Date: Thu, 24 Mar 2016 10:32:18 +0800 (CST)
Hi all ,
   I want to test a motor. So I need to record the value of motor pulse and encode automatic.
   But now, I could only move it manually with asyn stream , which way is better and easy to complete the auto move and record for I have little time to prepare.
   Any advice would be useful.

I use synApp5.6, epics 3.14.12.1, redhat 6.0

Thanks,
Li x


 


Replies:
RE: way of auto move and record Mooney, Tim M.
RE: way of auto move and record Mark Rivers

Navigate by Date:
Prev: RE: EPICS 3.15 IOC built much slower than 3.14 Mark Rivers
Next: MEDM is not operational [email protected]
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <20162017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: EPICS 3.15 IOC built much slower than 3.14 Mark Rivers
Next: RE: way of auto move and record Mooney, Tim M.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  <20162017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 15 Jul 2016 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·